Don't See Your Helmet? No Problem!

I may have missed listing your helmet, if so, I'm sorry! You can let me know at the bottom of this page what helmet you have and I'll add it to the list if it's compatible. Until Then, Here's 3 Things To Check for Compatibility

Dimensions. Check spacing dimensions on your desired helmet and make sure they align with a FLEX mount. 

The FLEX Slim chin mount has measurements as follows:

As long as your helmet chin area has this space available, then spacing will not be an issue with the FLEX Slim!

If you've got a little more surface area to work with, you might be able to use the FLEX Classic flexible action camera mount!

The FLEX Classic has dimensions as follows:
The FLEX Classic requires a much larger empty space, but it's meant for more than just helmet chin mounts. The FLEX Classic is great for; windscreens, fairings, cowls, visor peaks, and much more!

. Certain angles in certain spots may make it more difficult to use FLEX mounts on a specific helmet. Namely, aggressive creases down the center of the chin. This is because FLEX mounts are built in a premium, over-engineered, manner utilizing 4 screws anchoring the plastic center to the steel core and silicone coating.

This anchor is unable to bend. Meaning aggressive creases that run right down the center can be problematic. We mostly see this being an issue on helmets like AGV Pista/Corsa and similar. However, not all creases are problematic, the more subtle they are, the better it is for FLEX mounts.

In the image below, you can see the helmet has a very slight crease down the center. However, the crease is subtle enough that the foam 3M adhesive can still form around it without issue. As long as the crease is more subtle than the 3M foam's thickness, you tend to come out with a clean seal.

Choosing A Mount. Now that I've gone over what to look for, you can decide which chin mount is best for your helmet. If you still have questions, please feel free to reach out to me at or on my website chat in the bottom corner!

Don't forget, if you do try my mount and you decide it's not compatible with your helmet, I offer a hassle-free return and refund process at no cost to you.

If you didn't see your helmet listed, please let me know by filling out this form (If you can't see it click HERE)