RockLock Motorcycle Selfie Stick Mount: 1M+ Views in 24 Hours
MotoRadds / Meet RockLock
A small mount.
A million-view entrance.
The bolt-on motorcycle selfie stick mount built for a clean, dedicated camera setup. Two aluminum clamps. One unmistakable rear angle.
in the first 24 hours.
See what 1.2M views looks like.
The original “RockLock just launched!” Reel on @motoradds. This screenshot shows the public view count on Instagram’s Reels grid.
Watch the launch Reel ↗Screenshot captured October 22, 2026. View count shown: 1.2M.
Over a million views. In a single day. The RockLock release video took off on Instagram, and we’re proud of the response. To everyone who watched, shared, or sent it to a riding buddy: thank you.
Here’s the mount behind the launch. The MotoRadds RockLock motorcycle selfie stick mount uses two CNC-machined aluminum clamps to give a compatible rigid selfie stick a dedicated home at your motorcycle’s passenger peg location.
Built to look like it belongs.
A camera setup should feel like part of the motorcycle. RockLock keeps the arrangement simple: solid aluminum clamps, stainless hardware, and anti-slip rubber inserts sized to your stick.
It installs at a compatible passenger peg mounting point, with the peg removed on that side. Set the clamp and stick position during installation, then tighten the hardware according to the installation guidance. The result is a fixed setup for riders who already know the angle they want.
See it up close
Less hardware.
More motorcycle.
Watch the product video for a closer look at RockLock’s compact mounting approach. No chain of articulating arms. Just a dedicated place for your selfie stick.
See the product details →Two kits. Your choice.
Already own a compatible stick? Keep it. Building your setup from scratch? Add our Hyper-Stable stick. Both options use the same RockLock mounting system.
RockLock Mounts Only
Two CNC aluminum clamps, rubber inserts in multiple sizes, and a hex key. Fits compatible rigid selfie sticks from 19–34.92mm in diameter. Selfie stick and camera are not included.
RockLock Mounts + Selfie Stick
Everything in the Mounts Only kit, plus the Hyper-Stable selfie stick. Extends from 46.8 to 120cm (18.4–47.2 inches), with a manual twist lock and a 1/4-inch-20 camera thread with rubber vibration pad. Camera not included.
Shop RockLock at MotoRaddsCheck the fit. Get the shot.
RockLock is a bolt-on passenger peg mount, so motorcycle fitment matters. Check the peg connection and your stick diameter before ordering. It is not a universal fit for every motorcycle.
Your fitment checklist
- Bike connection: a compatible passenger peg mounting location with a 10mm hole.
- Peg removal: the passenger peg is removed on the installation side.
- Stick diameter: 19–34.92mm (0.75–1.375 inches), using the included inserts.
- Camera interface: the included Hyper-Stable stick uses a 1/4-inch-20 thread. Check whether your camera needs an adapter.
Using an Insta360, DJI, or GoPro camera? Check the complete camera-to-stick connection; interfaces vary by model. Unsure about your passenger peg mount? Send us a photo before ordering so we can help you check the setup.
RockLock questions, answered.
Can I use my existing selfie stick?
Yes, if it is a compatible rigid stick with a diameter of 19–34.92mm. Choose Mounts Only and use the included rubber inserts to match the clamp to the stick.
Does RockLock replace the passenger peg?
The passenger peg is removed on the side where RockLock is installed. Check that your motorcycle has a compatible bolt-through mounting point before ordering.
Can I reposition it between shots?
RockLock is designed as a fixed setup. Choose the position during installation and make any adjustments while parked. For frequent changes of mounting position, explore our Hyper-Stable Dual-Point system with crab claw mounts.
Where can I buy RockLock?
Shop RockLock at MotoRadds to choose either kit. The Mounts Only kit is also available on Amazon USA. Check your chosen listing for current price and availability.
Your next angle starts here.
A million views made the introduction. Now take a closer look at the details: CNC aluminum construction, two stick support points, and a compact bolt-on installation.
Also available on Amazon USA.
![MotoRadds vs. Ride Tech Moto: Which Chin Mount Actually Backs Its Promises? [2026]](http://motoradds.com/cdn/shop/articles/MotoRadds_vs_RideTech_Moto_Warranty_Clauses_2026_33e07645-121d-4dbc-871c-16d629525d00.jpg?v=1788255661&width=1080)
Leave a comment